Any updates ?
the bead of weld looks cold on the front cross member. your going to need another link on that rear end as well. kinda like a 4 link.
other than that i like it
what kind of motor/tranny?
can you post some body pics, even if it's in just in a shabby starting condition.
did that on here with my 33 dodge and man, what a difference in the starting pics to where l'm at now.[cl
Later
nice, looks in good shape, a whole lot better than my 33 did.
are ya choppin' the top or leaving it tall?
real nice solid starting point,
Later
go 6'' on the chop and 2'' on the channel, mocked up with the seats ya plan to run and see how it feels when ya sit in it.
if ya don't like the way it looks or feels, go an inch on the top, leave the 2'' channel. its easy to take more out but a pain to add. been thru that on a couple of projects and wish some had informed of this technique before l almost trashed a body by doing to much at once.
hope this helps,
Later
Hey 26,
Have you cycled that rear suspension? Looks like it would be a rough ride. Cool looking, but as a general rule on a triangulate 4-link the upper bars should be 70% the length of the lower links. So if your lower links are 24" long your upper links are going to be around 17" long (just an example).
I'm liking your build...I'll be keeping an eye on your progress...can't wait to see how it turns out.
Enter your email address to join: