Tie rods

[Unkl Ian]

People are always looking for tie rod ends.This might be helpful.
Got the info from Howeracing.com

TRW/Moog # ----Thread-------------Original application

ES150R---------3/4"x16 RH-----61-66 Chevy 1/2 & 3/4 ton 4x4,48-76 Ford 1/2 ton 4x4 w/ DANA

ES150L---------3/4"x16 LH --------- Same as above

 

[Unkl Ian]

TRW/Moog # ----Thread-------------Original application

ES2847R----------3/4"-16 RH -------86-96 Dodge 1/2, 3/4,1 ton 4x4 w/3500lb axle (Dana 44)

ES2848L --------- 3/4'-16 LH -------------same as above

 

[Unkl Ian]

TRW/Moog # ----Thread-------------Original application

ES361R ---------11/16"-18 RH ---------66-78 Eldorado & Toronado

ES370L----------5/8"-18 LH -----------65-68 Bel Air,Biscayne,Caprice,Impala

ES380R----------5/8"-18 RH -----------same as above

 

[Unkl Ian]

Double check before spending your money,
but this should get you pointed in the right direction.

 

[joehalford01]

sweet, thanks dude.

 

[Gastrick]

Thanks for the info Unkl Ian. I'll add it to my folder where I keep things like that.

 

[Unkl Ian]

I found some killer charts, with detailed tierod dimensions, in PDF format.


The part numbers are Moog/TRW:
http://flyingeyeballs.fileave.com/Tierods%202.pdf

http://flyingeyeballs.fileave.com/Tierods 3.pdf

If the info looks useful, I would suggest you download
or print a copy, since it is on a temporary freebie host site.

 

[LOWANDRATY]

I got my 3/4 -16 tie rods today left and right, bought them at fishers auto parts ( federated ) spicer brand 401-1008 ( LH ) and 401-1009 ( RH ) the taper is larger than 7 deg. I think more like 10 deg. but I will take a die grinder to my 7 deg. holes and just open them up a little, the tie rods do have the castle nut with cotter pin so they should not come loose and they also have a greese fitting on the side, they were about $ 30.00 ea. but are the top of the line not the cheeper version, thanks for all the help and info on this, I will make sure the next set of bones have 11/16 bungs in them before I buy them, or no bungs at all, and go 11/16 much more common.