Recent content by Gearhead10

I meet a guy couple yrs ago that put a 3.8 supercharged from a buick into a T roadster. He used a auto trans from a older s-10 pickup that had a 2.8 engine in it. See 2.8, 3.1, 3.4 and 3.8 liter engines all have same bolt pattern at bell housing. The trick is gettin coolant tubing and radiator...

I wonder what that guy is smoking. WOW[S

Well I found a couple of old porcelin light covers a 3 ft piece of round tube and a milk can for a base. Gonna use a 5gal water cooler jug for the glass part. I be takin some pics as I go. It should be cool when done

Has anyone here built a smaller scale gravity glass gas pump. I wanna build one but looking for ideas.

I'm running two 2bbl motorcraft carbs on a tunnel ram and am wondering if i need a fuel log and regulator. I'm running a stock fuel pump and the carbs are stock. On the 3 duece on our model A we ran a regulator, just wonder if I need to do same on this setup. I'm gettin ready to fire up the...

I just rebuilt a mustang box and set at 5-10 inch lbs preload. this is measured at the steering wheel side of the box while rotating the shaft. Go lock to lock and when the rotation is at the middle of the swing there should be a little drag that is when reading should be measured. Say it take...

Welcome to the RRR and I'm lovin the ride you got there.[dr

Well, finally got back to working on it again. Spent last couple weekends completely rebuilding rearend. Put in 3.70 gears, went thru the posi and put in all new bearings, brakes etc. Got it put back in the truck today. Next is driveshaft and start on the steer box. Man I hope this winter is a...

turkey flames or scallops

[cl[P[dr:D:cool:

ttttt

If your from the area your welcome to attend the 5th annual Good Ole Summertime Cruise-in in Sibley Ia. Sat nite June 26 7:00 - 9:00 pm, At the Beach House Drive-in. Fun for all ages, door prizes, DJ playn your favorite tunes and first annual Slow Drags (how slow can you go) with hand made...

Looks like a traditional hot rod to me. Very cool man! [dr[cl Love the flames and pinstriping.

Thanks guys, I believe what I got in mind is gonna work.

Im using a stock mechanical pump from NAPA. The model A has same pump and the regulator is set at 5psi on it. I believe a stock pump will put out 7-10 psi. Regulator don't worry me as much as running a fuel log. Does a log even out what is fed to carbs or is puttin a tee in just as effective...