440 mopar in a 1930 chevy

[ky509]

Does any one on here have any experience putting a BB mopar in an older chevy. I am building a 69 superbee and have some left over BB engines. I also have a 1930 chevy sedan. The original 4 cyl engine was mounted in between two quickly tapering frame rails of the old chevy. The frame from the cowl to the radiator must have a 4 to 5 inch taper. Anyone info will be appreciated. And thanks in advance.

 

[ronnysplymouth]

No experience in that application but anything will fit in anything if you have enough fabrication skills and ingenuity.......................I put a 426 Mopar in a 33 plymouth once, course it was completely custom built frame

 

[Whatever]

Let's see, measure about 10 time, 10 different way and start fabbin !!

Ronny's right, anything will fit in anything with enough work ................. Whatever

 

[LOCCGASSER]

the beauty of it all is you can cut, fab and create unlike any other...put the motor as far back as possible...fab some mounts, headers ect...I love stuff like that...it should be pretty straight foward.