65 jeep pu

[67caddy]

h i bought a65jeep pu what would be the best to lower it down nobody seems to
sell lowering shackles thougt putting springs under axle or remove some springs talk to jeep fans raise it up al so looking fore some baby moons to go
front hubs i put on 10 inch smoth rims thanks in advance

 

[skull]

forum

try google with some of the jeep forums, they may know,

Later

 

[Bamamav]

Need more info on axle type and what springs it has. Pictures will be even more help...

 

[Skip]

I googled your PU. Here is my recommendation.

Lose the front 4x4 axle.
Install most any straight axle that will hit the springs right.
Move the rear axle to on top of the rear springs and add lowering blocks to get the back where you want it.
Sell all the 4x4 gear to the guys that like to tear stuff up.
Buy a 350/350 or the like.
Stuff it in.
Get a drive shaft that fills the space between the trans and the rear end.
Make sure the brakes are good. And all that other safety stuff.

Assemble and drive the wheels off of the thing.

I think that will cover it.