Todd
He's just one of them Rusty-Chainers!
seriously? only 3 months? Feels like you been of this at least 6 months.
Glad you're back!
Glad you're back!
1936 Packard
- Thread starter zzrodder
- Start date
Help Support Rat Rods Rule:
zzrodder
It ain't grey hair, it's chrome!
Separation anxiety
Broke out the skyhook and took the body off for the last time to start the final bodywork. Lift it up, slide the chassis over and set the body down on the dolly. Off to the parts store for some bondo....
I'll need to come up with another method to get the body back on - wrapping a rope around the roof posts aint gonna work once its painted.. [S
Broke out the skyhook and took the body off for the last time to start the final bodywork. Lift it up, slide the chassis over and set the body down on the dolly. Off to the parts store for some bondo....
I'll need to come up with another method to get the body back on - wrapping a rope around the roof posts aint gonna work once its painted.. [S
Attachments
Snake Farm
Ol school snake charmer!
Maybe run down to the bank and get some velvet rope? 
What color of black are you going to paint it? [ddd
Good to see ya back on this...ZZ back at it is one of the "Signs of Spring" that I look for. [cl [P[P
.
What color of black are you going to paint it? [ddd Good to see ya back on this...ZZ back at it is one of the "Signs of Spring" that I look for. [cl [P[P
.
soltz
The Rat Captain
Yes Time to Finsh This Project
For the lift i've used well padded 2 x 4's through the side windows front and back, balances pretty well. [S food for thought[P
I'm with snakefarm, can't wait to see it all together [cl
For the lift i've used well padded 2 x 4's through the side windows front and back, balances pretty well. [S food for thought[P
I'm with snakefarm, can't wait to see it all together [cl
zzrodder
It ain't grey hair, it's chrome!
Maybe run down to the bank and get some velvet rope?
[cl [P[P
Ummm, BLACK black I think..
.
Good idea [cl I think I'll try it before its painted...
I thought about that, but the rear quarter windows slope down so much, the 2x4 might slide forward
In the past, I've jacked bodies up on 4x4's underneath the body but it gets kinda shaky once it's up high enuff to roll the chassis under plus it gets tough to slip them out as the body gets down close to landing
Some pics of using the cherry picker on one of my roadster projects - easy enough when there's no roof to get in the way
Attachments
zzrodder
It ain't grey hair, it's chrome!
I guess I must have been talking in my sleep and promised my wife I'd paint the inside of the house [S. So after a couple weeks getting that done, now I can get back onto the Packard.
I did a test lift of the body using a sling inside with the cherry picker like jfg455 suggested. Thanks for the tip ! With a little balancing with some weights, it works fine - now to get back onto the body work.
. So after a couple weeks getting that done, now I can get back onto the Packard.I did a test lift of the body using a sling inside with the cherry picker like jfg455 suggested. Thanks for the tip ! With a little balancing with some weights, it works fine - now to get back onto the body work.
Attachments
christcrusader13
Zip-Tie Mechanic
I prefer the cherry picker method.... i've done two body swaps that way and removed soem truck cabs...
radford46
Well-known member
Where's the Packard?
Life getting in the way ZZ? Hope it's nothing bad.
Life getting in the way ZZ? Hope it's nothing bad.
Todd
He's just one of them Rusty-Chainers!
Maybe she stuck more things on the honey-do list?
zzrodder
It ain't grey hair, it's chrome!
Little bit of both...
I'm plugging away on the body work but having a tough time putting in enough hours to get past the bondo stage of the main body, not really picture worthy, what with all the dust.... Hope to get the doors and trunk fitted in the next week or so and get the first shot of primer/surfacer on, then block, prime, block, prime, etc. 'till its ready for the black.
zzrodder
It ain't grey hair, it's chrome!
After a month of body work, I got the first shot of primer/surfacer on the body, doors trunk lid and rear fenders. A little crowded when spraying and I made the mistake of waiting till 10 AM to start. 90+ degree heat and med. temp reducer makes for tough going and a lot of sweat..... but I still got a couple decent coats on. Now for some spot filling and a ton of block sanding.
Attachments
I-R-POPS
''Rusty Mopar Slacker''
Beeeeeeautiful!!! That's all I can say. Nice job.
Ricks Garage
Well-known member
Mercedes uses three different blacks, What black are you using?
Todd
He's just one of them Rusty-Chainers!
metallic would be awesome.
sgtpontiac
Older, Wiser and Still Buildin'
Very nice man.....
Should look killer in black...[cl
Should look killer in black...[cl
zzrodder
It ain't grey hair, it's chrome!
I just use PPG basic black urethane, no custom color or model specific stuff or sparkly bits for me. This way repairs or touch ups are easy, also any runs (and there will be some!
) can be buffed out without showing - can't do that with metallic....
I-R-POPS
''Rusty Mopar Slacker''
Sounds like a perfect choice for that ride. It's gonna be killer!!
zzrodder
It ain't grey hair, it's chrome!
Got up at 4AM today and splashed on the color at last. Maybe the first time I've painted a body without runs! Some wicked orange peel, but that's par for the course, some color sanding and polishing to do in a couple days after it hardens. Painted the doors and rear fenders, trunk lid yesterday - of course I got some runs in the fenders
Attachments
05snopro440
Well-known member
Got up at 4AM today and splashed on the color at last. Maybe the first time I've painted a body without runs! Some wicked orange peel, but that's par for the course, some color sanding and polishing to do in a couple days after it hardens. Painted the doors and rear fenders, trunk lid yesterday - of course I got some runs in the fenders
Nobody likes a case of the runs.
Seriously though, that's going to look killer once it's all colour sanded and assembled [dr
