1949 Ford bobber build

[zzrodder]

Coming along nicely [cl
On my Hennway, I used pipe for the top roll like you did but just made my corner posts from 2 x 2 x .063 box tubing and extended them right up to the top roll, tying it in solidly.

 

[gold03]

Thanks Crank. Now it makes sense. I have a plan for the stake pocket offset.

I know the side of the box is high. I want it higher than stock. There is a plan for the space above the tire. Or, actually several plan possibilities

 

[gold03]

box side

Box see progress. Not sure if I want to spray a little primer before I weld on the stake pockets of just weld them in. [S

 

[gold03]

Hey ZZ, that looks pretty slick!

 

[forbigpicture]

Nice work Gold.....looks great[cl[cl

 

[Torchie]

Looks great gold. I would shoot some weld thru primer in those pockets at least. But I tend to be cautious about leaving any bare metal.
Torchie

 

[Old Iron]

Those sure are purdy !!!!!!!!!!!!!!!!!!!
Nice work!!!!!!!!!!!!

 

[gold03]

Thanks for the compliments guys. Need to find some weld through primer. Amazon.ca for$80.00 for a spray bomb. Is that real?

 

[Dr Crankenstein]

Thanks for the compliments guys. Need to find some weld through primer. Amazon.ca for$80.00 for a spray bomb. Is that real?

Ridiculous. Check your local paint and body suppliers. I haven't bought such things for a while, but used to be a fan of SEM products... good quality and lower priced than most...

http://www.semproducts.com/rust-and-corrosion-rust-preventers/copperweld-primer


... if all else fails, Acklands-Grainger carries one, though you need a "wholesale" account to buy.

https://www.acklandsgrainger.com/AG...lobalProductDetailDisplay.do?item_code=DSSSCW

.

 

[Torchie]

I would think that your local parts house would have some. Last can I bought was under $10 as I remember it.
Torchie

 

[gold03]

That's good news... I just about choked when I saw that price. Thought it might be one of the reasons there is so much rust around here![ddd

 

[SkinnyPedal]

Love the project. Great work and skills.
Watching

 

[gold03]

more progress

Drivers side is welded, and my dutch oven stand.

 

[I-R-POPS]

The bed's looking great Gold. Nice work.
I don't know about the stand tho, it may not be made of heavy enough steel.

 

[gold03]

Hey Pops, I had an old oxygen bottle sitting around and used the base. Free steel. I am hoping it will slowly release heat from the charcoal into the dutch oven. Ive been getting into smoking, BBQ, Disced and dutch oven cooking as another interest.

 

[Dirtyrat]

I posted in Tips, Eastwood has the weld through primer for about $15/can.
bed is looking great Gold!

 

[Old Iron]

Hey Pops, I had an old oxygen bottle sitting around and used the base. Free steel. I am hoping it will slowly release heat from the charcoal into the dutch oven. Ive been getting into smoking, BBQ, Disced and dutch oven cooking as another interest.

Used oxy bottles go for around $100 to $180 here. They don't even look to see if they're out of date, they just trade them out at the welding supply. They put them in a cage and certify them all together.

 

[gold03]

About the O2 tank. I couldn't get anything for it, couldn't get it filled or certified. got it for free. cut it up for several different things.

Thanks for the compliments guys.

 

[Willowbilly3]

About the O2 tank. I couldn't get anything for it, couldn't get it filled or certified. got it for free. cut it up for several different things.

Thanks for the compliments guys.

The top makes a great bell

 

[Old Iron]

It sure made a nice piece