1957 F100 build

[Stormystorm]

good stuff lol, sense I unintentionally fueled a fire, and recently pulled the rear axle out of a donor town car I took some rough measurements,
57 inchs outside to outside of brackets
70 inchs hub to hub (roughly still has tire and a donut on it) Google says their 65 inches
My 59s inner box above wheel wells was like 74 inches rough.
Then my buddy showed up and we finished up installing the car hoist
looks like going to tight, alot measuring and fab work. but as we know dropping them to the dirt takes effort. ill probably be back to shop tomorrow agian I theres anything else I can get measurements on so you don't have to relu on Google or crawl under a dead vic.

That’d be awesome. I’m tried of conflicting google info.

What wheels are you planning on running? I’ve been looking around Craigslist for wheels off a mustang or anything. I also realized a lot of imports have 5x114.3 ( the metric equivalent of 5x4.5) I just have to figure out how much offset we’ll need.

For the front end how much room do you have between the tire and fender?

 

[jared nelson]

That’d be awesome. I’m tried of conflicting google info.

What wheels are you planning on running? I’ve been looking around Craigslist for wheels off a mustang or anything. I also realized a lot of imports have 5x114.3 ( the metric equivalent of 5x4.5) I just have to figure out how much offset we’ll need.

For the front end how much room do you have between the tire and fender?

sorry for the miscommunication, the vic front end is installed in a '72 F100, very different body, no air ride, and the front clip isn't on it at the moment. The rear axle from the doner town car (vic) isn't installed in the '72 (its in the may come in handy parts pile lol), we flipped the 9 in. that came in the truck.