28 Fast Four build

[DozerII]

The C-notches are going to be stout [cl
[P[P[P

Nicely done [cl[cl

You build like I do... figure out what's "good enough" and multiply by three. [cl

.

Thanks Guys, I have always preferred over building.

 

[23crate]

really like that parallel 4 set up.. nice work all round

 

[bkvail]

really like that parallel 4 set up.. nice work all round

I was thinking the same thing - we did ours very similar, only 'outboard' (and longer links I think)

 

[DozerII]

I was thinking the same thing - we did ours very similar, only 'outboard' (and longer links I think)

Thanks 23 and BK.


Should be another update later today, after the pan hard bard gets figured out.

 

[Torchie]

Great job on the C notch.[cl
Most I have seen look way too flimsy for me.
[P [P [P
Torchie

 

[DozerII]

Great job on the C notch.[cl
Most I have seen look way too flimsy for me.
[P [P [P
Torchie

Thanks Torchie, I agree some of the kits available scare me.

 

[DozerII]

Well the panhard bar and mounts only took 8 hours. Started at 6am and did the suspension first cycle at 2.

And a short video.

https://youtu.be/jSFcSmTNeeI

 

[Old Iron]

That's gonna work [cl[cl[cl

 

[DozerII]

That's gonna work [cl[cl[cl

Thanks OI

 

[forbigpicture]

Looks good Dozer....
[P[P

 

[smallfoot]

Moving right along and looking good![cl[P

 

[lowbudget50]

Very nice sir!!! Looks like it all fits in there nicely

 

[DozerII]

Thanks Guys.

 

[DozerII]

It took three tries to get a design for the trans mount and structure I was happy with. I am waiting for the OEM trans mount to come in to finish the removable lower section.

Two days ago there was 3 inches of snow on the ground and it was far too much like winter.

Today is gorgeous out so, I rolled the chassis outside to get some pictures and give the shop a much needed cleaning. It sure looks short

 

[bob w]

Do you think it's strong enough? Just kidding. Nice fab work on the frame. It's nice to see it outside. Get a better idea if what you got.

 

[animal]

That looks good...and short. That should be plenty stout.

 

[Old Iron]

Looks really good!!!!!!!!!!!!!!!!!!!!!

 

[Torchie]

^^^^^^ All of the above^^^^^
[cl [P [P
Torchie

 

[DozerII]

Do you think it's strong enough? Just kidding. Nice fab work on the frame. It's nice to see it outside. Get a better idea if what you got.

Hope so but the frame is just about to have it's 90th birthday. Thanks

That looks good...and short. That should be plenty stout.

Thank, 109"wheel base

Looks really good!!!!!!!!!!!!!!!!!!!!!

^^^^^^ All of the above^^^^^

Thanks OI and Torchie
[cl [P [P
Torchie

 

[forbigpicture]

Dozer, really like the X member....great fab work on the whole frame !!!!!

[P [P [P