Low budget 2.0

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I bought a worn out 10 gallon air compressor one time when I couldn’t afford anything else. Replaced the compressor with a York off of something, welded the clutch up so it ran all the time. Had to weld the pulley off an old tiller on it to slow it down where the motor would pull it. Eventually put all that on a 30 gallon well tank. Used that junk for two or three years until I bought a 10 gallon portable compressor. Ran an impact and paint gun pretty good, just slow. Also put one on an old CJ 5 Jeep I had to air tires up with, worked great.
 
I bought a worn out 10 gallon air compressor one time when I couldn’t afford anything else. Replaced the compressor with a York off of something, welded the clutch up so it ran all the time. Had to weld the pulley off an old tiller on it to slow it down where the motor would pull it. Eventually put all that on a 30 gallon well tank. Used that junk for two or three years until I bought a 10 gallon portable compressor. Ran an impact and paint gun pretty good, just slow. Also put one on an old CJ 5 Jeep I had to air tires up with, worked great.

Oh yes!!! I have ran one on all my off road trucks! My bronco might get one soon!!!
 
Little things done tonight. 250psi safety valve installed. The air system works great now! Also installed a 3.0smp dual USB charger with voltage gauge on it. Installed the front bumper. Much better!! Also bought new power steering pump. The old one is leaking!
 

Attachments

  • IMG_20230314_171326018_HDR.jpg
    IMG_20230314_171326018_HDR.jpg
    92.4 KB
  • IMG_20230314_171332408_HDR.jpg
    IMG_20230314_171332408_HDR.jpg
    89.1 KB
  • IMG_20230314_163203274_HDR.jpg
    IMG_20230314_163203274_HDR.jpg
    104.6 KB
  • IMG_20230314_170507030_HDR.jpg
    IMG_20230314_170507030_HDR.jpg
    120.5 KB
Got the front.of.the truck acid washed. The grill is super shiny!!
 

Attachments

  • IMG_20230315_192722918_HDR.jpg
    IMG_20230315_192722918_HDR.jpg
    116.7 KB
Started the metal clean up on the body today.
 

Attachments

  • IMG_20230316_172215684_HDR.jpg
    IMG_20230316_172215684_HDR.jpg
    157.9 KB
  • IMG_20230316_173607383_HDR.jpg
    IMG_20230316_173607383_HDR.jpg
    116.8 KB
  • IMG_20230316_173611146_HDR.jpg
    IMG_20230316_173611146_HDR.jpg
    123.5 KB
  • IMG_20230316_173614882_HDR.jpg
    IMG_20230316_173614882_HDR.jpg
    103.6 KB
After a continuous 4 hours of grinding and polishing with my drum sander I got from harbor freight, I am happy to report that it was well worth the money. I know somebody had asked about wanting to know the longevity of the grinding pads. The course one is pretty stiff. It will be thrown away now that I'm done with the truck because it is pretty much gone. But I did essentially sand down a whole truck with it. I want to say it was $12 for that pad at harbor freight. I couldn't have done that for $12 with any other sanding apparatus. My pictures show comparison of the polishing pad on the right and the heavy sanding on the left after I was done with it. It does make a pretty good mess but it does a good job
 

Attachments

  • IMG_20230317_091225442_HDR.jpg
    IMG_20230317_091225442_HDR.jpg
    151 KB
  • IMG_20230317_095920354_HDR.jpg
    IMG_20230317_095920354_HDR.jpg
    90.1 KB
  • IMG_20230317_091218750_HDR.jpg
    IMG_20230317_091218750_HDR.jpg
    123 KB
  • IMG_20230317_113413785_HDR.jpg
    IMG_20230317_113413785_HDR.jpg
    104.8 KB
  • IMG_20230317_124454852_HDR.jpg
    IMG_20230317_124454852_HDR.jpg
    124.2 KB
Almost done!
 

Attachments

  • Screenshot_20230317-205255.jpg
    Screenshot_20230317-205255.jpg
    54.2 KB
  • Screenshot_20230317-205302.jpg
    Screenshot_20230317-205302.jpg
    44.1 KB
  • Screenshot_20230317-205248.jpg
    Screenshot_20230317-205248.jpg
    45.3 KB
  • Screenshot_20230317-205330.jpg
    Screenshot_20230317-205330.jpg
    40.4 KB
  • Screenshot_20230317-205318.jpg
    Screenshot_20230317-205318.jpg
    24.2 KB
  • Screenshot_20230317-205224.jpg
    Screenshot_20230317-205224.jpg
    35.9 KB
Just adding the detail stuff today. Visor, emblems and hood ornament. Also pulled power steering pump off cause it was leaking
 

Attachments

  • IMG_20230319_182201456_HDR.jpg
    IMG_20230319_182201456_HDR.jpg
    109 KB

Latest posts

Back
Top