Model A Pickup just another build !

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Here's what I ended up with.
 

Attachments

  • IMG_20230812_125229746.jpg
    IMG_20230812_125229746.jpg
    68.5 KB
  • IMG_20230812_125222909_HDR.jpg
    IMG_20230812_125222909_HDR.jpg
    77 KB
First picture is no weight. Second is engine and transmission weight. It sets it down pretty good.
I will have to put one more leaf back in and notch the frame at the crossmember.
 

Attachments

  • IMG_20230812_133152760_HDR.jpg
    IMG_20230812_133152760_HDR.jpg
    144.5 KB
  • IMG_20230812_133532575_HDR.jpg
    IMG_20230812_133532575_HDR.jpg
    147.4 KB
  • IMG_20230812_134953020.jpg
    IMG_20230812_134953020.jpg
    86.1 KB
Put the cab and bed back on. Cab and bed are channeled 4". Everything lines up pretty good.
 

Attachments

  • IMG_20230812_134556240_HDR.jpg
    IMG_20230812_134556240_HDR.jpg
    149.9 KB
  • IMG_20230812_140136906.jpg
    IMG_20230812_140136906.jpg
    151.9 KB
  • IMG_20230812_134917029_HDR.jpg
    IMG_20230812_134917029_HDR.jpg
    122.6 KB
I added 2 leafs to the front and notched the frame. Much better! Thing don't hit now.
 

Attachments

  • IMG_20230813_104202583.jpg
    IMG_20230813_104202583.jpg
    79.3 KB
  • IMG_20230813_141852732.jpg
    IMG_20230813_141852732.jpg
    149.5 KB
  • IMG_20230813_104119008.jpg
    IMG_20230813_104119008.jpg
    43 KB
Set the caster at 8° back and pinion angle at 3° up.
I put the radius rod mounts inside the frame to gain a little turning radius.
 

Attachments

  • IMG_20230813_104545545.jpg
    IMG_20230813_104545545.jpg
    108.9 KB
  • IMG_20230813_104556511.jpg
    IMG_20230813_104556511.jpg
    96.4 KB
  • IMG_20230813_140604307.jpg
    IMG_20230813_140604307.jpg
    128 KB

Latest posts

Back
Top