THAT build

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
flames

Burgerman ''Way to go! I bet that intake is working fine.''

ya, l think it is, no exhaust on her right now, however, we did shoot flames 3 feet outta the exhaust ports and burned a little hair offa my arm:eek:

Later :cool:
 
Last edited:
Vr000m Vr000m Vr000m

Houston we have ignition:D:D:D

put in the distributor, wired up the spark plugs, ran a hot lead, hot wired the starter & she fired on the first try in about 5 seconds......


Later:cool:

Listening to the Vr000m's I heard a hint of a miss in #2 :D:D;)
 
3 1/2 inch baffled ends

using the Car Chemistry Header 3 1/2 inch Baffled end turn outs and mounting the headers pointing out a slight bit.

easy, quick and cheap, K I S S method.

brutally ugly, but hey, it's a RAT.

l see straight pipes all the time at car shows so l figure this outta work.

Later :cool:
 

Attachments

  • pic 6  of Car Chemistry Header Baffles  three and a half inch.jpg
    pic 6 of Car Chemistry Header Baffles three and a half inch.jpg
    22.5 KB
  • pic 5 of Car Chemistry Header Baffles  three and a half inch.jpg
    pic 5 of Car Chemistry Header Baffles three and a half inch.jpg
    9.1 KB
  • pic 1 of Car Chemistry Header Baffles  three and a half inch.jpg
    pic 1 of Car Chemistry Header Baffles three and a half inch.jpg
    138.4 KB
  • pic 2 of Car Chemistry Header Baffles  three and a half inch.jpg
    pic 2 of Car Chemistry Header Baffles three and a half inch.jpg
    126.3 KB
  • pic 3 of Car Chemistry Header Baffles  three and a half inch.jpg
    pic 3 of Car Chemistry Header Baffles three and a half inch.jpg
    130.5 KB
  • pic 4 of Car Chemistry Header Baffles  three and a half inch.jpg
    pic 4 of Car Chemistry Header Baffles three and a half inch.jpg
    141.7 KB
Last edited:
grille

changed my mind, radiator in front with a grille, simplifies things a lot.

just used 1'' X 1'' & 1''X 2'' scrap to rig it up, works good.[;)

any one know what grille shell this is[S:confused:


Later :cool:
 

Attachments

  • grille 3.jpg
    grille 3.jpg
    146.4 KB
  • grille 5.jpg
    grille 5.jpg
    129.8 KB
  • grille7.jpg
    grille7.jpg
    147.4 KB
  • grille  4.jpg
    grille 4.jpg
    108.8 KB
  • grille 10.jpg
    grille 10.jpg
    150.3 KB
  • grille   8.jpg
    grille 8.jpg
    138.4 KB
any one know what grille shell this is[S:confused:


Later :cool:
Credit to Bergerman.
38 Ford PU. The 39 doesn't have the separate bar down the middle. I have one hangin' on the wall in my shop. My 39 has a 39 grille.



Hey Bergerman, Warts grow on ya', too. :D
 
closer

engine is pretty much done, put the nice chrome valve covers on, braided steel radiator hose laying around off another car l parted out, header ends gives me horns, and not the kind that honk.[ddd


on to wiring, fuel line ect[;)

Later :cool:
 

Attachments

  • headers 1.jpg
    headers 1.jpg
    153.3 KB
  • headers 2.jpg
    headers 2.jpg
    126.2 KB
  • headers 3.jpg
    headers 3.jpg
    129.5 KB
Last edited:
Credit to Bergerman.
38 Ford PU. The 39 doesn't have the separate bar down the middle. I have one hangin' on the wall in my shop. My 39 has a 39 grille.

Hey Bergerman, Warts grow on ya', too. :D

So this grill is perfect, grows on ya, just like THAT does. :D Exhaust is great Skull. if I had hearing aids, would take em out :cool:
[cl
 

Latest posts

Back
Top