Well I guess it's started
- Thread starter soltz
- Start date
Help Support Rat Rods Rule:
05snopro440
Well-known member
But it looks killer!
JBailey
Well-known member
Your daughter will have the coolest Elky around when you two get done. That bumper came out great!
soltz
The Rat Captain
Little by Little
Just a little update and some be4 and after shots. Got the exhaust serviceable, I'm going with 2" straight pipes (until I ticketed) all the lights working, a piece of glass in front of the steering wheel. Daughter is pestering to drive it so, I guess it's time to get the lic. current and insured [S and yes I wouldn't mind a little drive myself.
Day 1
Day 373
Bumper before, during and after
Just a little update and some be4 and after shots. Got the exhaust serviceable, I'm going with 2" straight pipes (until I ticketed) all the lights working, a piece of glass in front of the steering wheel. Daughter is pestering to drive it so, I guess it's time to get the lic. current and insured [S and yes I wouldn't mind a little drive myself.
Day 1
Day 373
Bumper before, during and after
GJunktionMike
Something's wrong with that boy!
Looking sharp [P
bob w
Still crazy after all these years!
So much nicer than the factory mad 'em.
soltz
The Rat Captain
Thanks guys
tomorrow we'll do another windshield. I've been practicing with the small cutting wheel and it seem to work pretty well [S I'll try to get pix while we do the cuts. This time I think three cuts to the final shape [S
C-Ya
tomorrow we'll do another windshield. I've been practicing with the small cutting wheel and it seem to work pretty well [S I'll try to get pix while we do the cuts. This time I think three cuts to the final shape [S
C-Ya
christcrusader13
Zip-Tie Mechanic
This elky looks amazing, I'm hoping all goes well with the window cutting 
soltz
The Rat Captain
It Looked So Good In Practice ?
Best laid plans of mice and man [S
I'm not posting an after pic because it's ugly !!!
The good news this one only cost me $41.17, I guess I'll look for a professional [S
Or not, we've only given it two try's
http://s1054.photobucket.com/user/ssoltz/media/Windshield2_zps3c0c227f.mp4.html
Best laid plans of mice and man [S
I'm not posting an after pic because it's ugly !!!
The good news this one only cost me $41.17, I guess I'll look for a professional [S
Or not, we've only given it two try's
http://s1054.photobucket.com/user/ssoltz/media/Windshield2_zps3c0c227f.mp4.html
soltz
The Rat Captain
Sorry about that
It's the standard photobucket thing?
lots and I mean lots of vertical cracks. I'm thinking maybe the heat or the vibration [S I'm going to try your advise and build a curved platform to support it while cutting the old fashion way next time.
It's the standard photobucket thing?
lots and I mean lots of vertical cracks. I'm thinking maybe the heat or the vibration [S I'm going to try your advise and build a curved platform to support it while cutting the old fashion way next time.
christcrusader13
Zip-Tie Mechanic
I finally remembered where I saw this
Soltz,
I'm not sure if this is the same type of glass, but this is one technique that another builder uses, he has some other handy tips too.
http://coloradomelons.com/videos/
Look for the Glass Cutting 101 video under the automotive section
Soltz,
I'm not sure if this is the same type of glass, but this is one technique that another builder uses, he has some other handy tips too.
http://coloradomelons.com/videos/
Look for the Glass Cutting 101 video under the automotive section
05snopro440
Well-known member
The video worked just fine for me, I'm not sure why Sam can't see it.
As for the cracks, I would think it's because of the heat and vibration. Those cutoff discs can tend to move some if you get them cutting hard stuff like glass, plus the glass is brittle so I'm sure it was probably vibration. Hopefully you can figure out something easy!
Bamamav
Well-known member
That method might work better if you had a hose running water over the cut to cool it.
Have you though about using a sandblaster? I saw a video of a guy doing it that way, it took a while, but it didn't crack anywhere. You have to mask off everything but the cut line or you get sand pecks everywhere from the bouncing sand.
Have you though about using a sandblaster? I saw a video of a guy doing it that way, it took a while, but it didn't crack anywhere. You have to mask off everything but the cut line or you get sand pecks everywhere from the bouncing sand.
05snopro440
Well-known member
Just an idea, but once you find a method that works why not cut two windshields, and store one away so that if you ever need to replace it it's an easy swap job.
Finally got the vid to work. HEAT!!! Glass doesn't like pinpoint heat. Also, odds are you are not getting a smooth edge - any chip is more susceptible to start a crack.
Running a little water over it as you cut should help a lot. Also, it's probably better to cut all the way through as you go rather than part way through. I'd say cut one layer at a time, but you'd probably slightly score the second layer in spots and that would be asking for uncontrolled cracks.
You'll need to make sure the discard piece doesn't put any stress on the cut line as you go. Maybe even clamping it to the good part after the first several inches of cut. Possibly cut off the excess every foot or so?
I'm absolutely not practiced at this, but i'd try running water, cutting both layers at the same time, and making sure it is all supported well.
Practice on a broken piece of glass if you have any around.
Running a little water over it as you cut should help a lot. Also, it's probably better to cut all the way through as you go rather than part way through. I'd say cut one layer at a time, but you'd probably slightly score the second layer in spots and that would be asking for uncontrolled cracks.
You'll need to make sure the discard piece doesn't put any stress on the cut line as you go. Maybe even clamping it to the good part after the first several inches of cut. Possibly cut off the excess every foot or so?
I'm absolutely not practiced at this, but i'd try running water, cutting both layers at the same time, and making sure it is all supported well.
Practice on a broken piece of glass if you have any around.
Torchie
Well-known member
All good advice.
I have cut glass using an air powered thin kerf'd cut off wheel. You need to use water. Keep the cut off piece supported as Sam says.
Once I made the cut I used a belt sander to cleanup the edge and to do some shaping. Again, Use water.
If you use the sand blast method tape both side of the glass off with heavy tape.(Duct) and still keep it all supported.
Blast thru the first layer of glass then cut thru the saftey laminate and then blast away the second half. Some guys use ignited lighter fluid to melt the plastic between the layers making it easier to cut.
Old glass has a better chance of cracking as it gets brittle with age. Kind of like me.
Good luck and keep at it. Most pros will tell you to have at least 2 winshields before they cut.
Torchie.
I have cut glass using an air powered thin kerf'd cut off wheel. You need to use water. Keep the cut off piece supported as Sam says.
Once I made the cut I used a belt sander to cleanup the edge and to do some shaping. Again, Use water.
If you use the sand blast method tape both side of the glass off with heavy tape.(Duct) and still keep it all supported.
Blast thru the first layer of glass then cut thru the saftey laminate and then blast away the second half. Some guys use ignited lighter fluid to melt the plastic between the layers making it easier to cut.
Old glass has a better chance of cracking as it gets brittle with age. Kind of like me.
Good luck and keep at it. Most pros will tell you to have at least 2 winshields before they cut.
Torchie.
soltz
The Rat Captain
Thanks everyone
All good ideas, I have time to figure it out, I used the two windshields locally, the next one has to come from far far away, be here next week, still just $42, time to think and plan. [S I'll keep you up dated, so stand by [P
thanks again
All good ideas, I have time to figure it out, I used the two windshields locally, the next one has to come from far far away, be here next week, still just $42, time to think and plan. [S I'll keep you up dated, so stand by [P
thanks again
